Sizes:
We recommend you to size up by one size for men's sizes especially for hoodies, as these sizes are unisex and made in a way to cater to all fit preferences. E.g: If you usually wear medium hoodies for a loose/oversize fit, we recommend you order a large hoodie instead.
T-shirts:
Size | S | M | L | XL | 2XL | 3XL |
Chest | 46 | 51 | 56 | 61 | 66 | 71 |
Length | 71 | 74 | 76 | 79 | 81 | 84 |
Hoodies:
Size | S | M | L | XL | 2XL | 3XL |
Chest | 53 | 56 | 59 | 62 | 65 | 69 |
Length | 68 | 70 | 73 | 75 | 77 | 79 |
Wash instructions for best preservation:
-
Turn Garments Inside Out: Before washing, turn your t-shirts and hoodies inside out. This protects the print from friction and abrasion during the wash cycle.
-
Use Cold Water: Wash the garments in cold water to prevent the print from fading or cracking (MAX 30°C). Hot water can weaken the adhesive and damage the print.
-
Select Gentle Cycle: Choose a gentle or delicate cycle on your washing machine. This reduces agitation and extends the life of both the fabric and the print.
-
Use Mild Detergent: Avoid bleach, fabric softeners, and harsh chemicals that can deteriorate the print and fabric fibers.
-
Do Not Overload the Machine: Wash with similar colors and avoid overloading to ensure effective cleaning and minimal wear on the garments.
-
Air Dry Recommended:
- Hang Dry: For best results, hang the garments to dry naturally. This prevents shrinkage and preserves the print.
- Avoid Direct Sunlight: Prolonged exposure to sunlight can fade colors, so dry in the shade if possible.
-
If Using a Dryer:
- Low Heat Setting: Use the lowest heat setting to minimize potential damage.
- Remove Promptly: Take the garments out as soon as the cycle ends to prevent wrinkles.
-
Avoid Ironing Over the Print:`
- Turn Inside Out: If ironing is necessary, turn the garment inside out.
- Low Heat: Use a low-temperature setting.
- Protective Cloth: Place a thin cloth between the iron and the garment to avoid direct contact with the print.
-
Do Not Dry Clean: The chemicals used in dry cleaning can harm the print. Stick to machine washing.